Ddns; Pppoe - Abus IPCB42501 Manuel Utilisateur Logiciel

If the camera is to be accessed via routers (e.g. from the internet to the local
network), port forwarding must be set up for the HTTP, RTSP and SDK port in the
router. If HTTPS is also being used, port forwarding must be set up for the HTTPS
port too.

7.5.2.3 DDNS

Activate DDNS:
Select service:
Server Address:
Domain:
Port:
User name:
Password:
Further information on the "ABUS SERVER" can be found on the help page at the
following address:
https://www.abus-server.com/faq.html

7.5.2.4 PPPoE

The PPPoE protocol makes it possible to connect the camera to a provider modem directly. An
additional router is not required.
Enable PPPoE:
Dynamic IP:
User name:
Password:
Confirm:
ticking the checkbox activates the DDNS function.
select a service provider for the DDNS service.
IP address of the service provider
registered host name with the DDNS service provider
port for the service
user account identification with the DDNS service provider
account password with the DDNS service provider
enable the PPPoE function
display of the dynamically determined public IP address
input of the user name from the provider (ISP)
input of the password from the provider (ISP)
Password confirmation
91