Cover Detection; Alarm Input (Only Ipcb42551); Alarm Output (Only Ipcb42551) - Abus IPCB42501 Manuel Utilisateur Logiciel

7.5.7.2 Cover Detection

Enable Cover Detection:
Preview Area:
Draw Area:
Delete:
Sensitivity:

7.5.7.3 Alarm input (only IPCB42551)

Alarm input:
Alarm name:
Alarm type:

7.5.7.4 Alarm output (only IPCB42551)

Alarm output:
Alarm name:
Dwell time:
This function detects if an area within the live image is covered.
Preview and configuration area.
Draw here an area which shall be monitored by tamper detection.
Procedure: Press to start -> draw area with left mouse button ->
press again to stop drawing.
Delete the area.
Change the sensitivity of the detection (3 levels).
Select the alarm input to be configured here (number depends on
camera model).
enter the name here.
the alarm type determines the idle and triggered statuses.
NO: normally open (normal status open)
NC: normally closed (normal status closed)
Select the alarm output to be configured here (number depends on
camera model).
enter the name here.
select the duration of switching output activity in the event of an
alarm.
Manual: The output is only activated for as long as the event lasts.
103