Unify OpenScape Desk Phone IP 55G HFA Guide Rapide D'installation Et De Référence page 12

Connect the Telephone
If your LAN does not have PoE (Power over Ethernet; ask your admi-
nistrator), then you need to use a power supply.
Insert the power supply plug into the Power jack
the telephone.
To prevent damage to the telephone, the power supply must only be
plugged into the Power jack
Desk Installation
For desk installation insert the LAN cable into the Network jack
on the base of the telephone.
Optional Connections
: LAN connection to PC
: Connection to Headset
: Connection to USB memorystick or USB camera
: Connection to Keymodule
If further settings are required for correct operation of the telepho-
ne, please contact your administrator.
12
.
on the base of