The unique AquaSmart™ wash
US
20
CA
The AquaSmart™ washer has two modes of washing, HE 'On' (High Efficiency) and
HE 'Off' (Conventional). Both modes start the same way, with a Detergent Activating wash.
Detergent Activating wash
AquaSmart™ fills the basket at the selected water temperature,
with just enough water so the clothes are saturated. This small
amount of sudsy water flows through the clothes, up a specially
designed portal and back onto the clothes in a waterfall effect. This
thoroughly dissolves and activates the detergent.
High Efficiency On (High Efficiency mode)
In the High Efficiency mode the AquaSmart™ then fills with just
enough cool water to lift the clothes off the low-profile agitator so
that when it rotates, the clothes gently roll over each other. This
wash gives you the benefit of water savings, using similar quantities
of water to most front loaders. Select High Efficiency ON.
High Efficiency Off (Conventional mode)
The Conventional mode is the immersion wash all top-load washer
users are familiar with. However, this mode still uses less water than
that of other top loaders which utilise the immersion wash. After
the Detergent Activating wash the AquaSmart™ fills with cold water
until the clothes are submerged, and gently turns the clothes over.
We recommend this mode when the dilution effect of water can
solve or prevent common wash problems. For example, when dye or
color run can be a problem (ie new, dark-colored garments), or when
washing sandy towels. Select High Efficiency OFF.
Some cycles can be used in both modes, whilst others are available in only one.
Regular
Heavy
Delicate
Sheets
Easy Iron
Bulky
Allergy
Whites
Towels
n/a - not available
The two wash modes mean that your AquaSmart™ washer gives you the best of both worlds,
accommodating any laundry situation.
WL4027P
Mode
HE On
HE Off
–
–
–
Fig.14 Detergent Activating wash
Model
HE On
–
–
–
–
n/a
n/a
n/a
Fig.15 High Efficiency wash
Fig.16 Conventional wash
WL4027J
Mode
HE Off
–
n/a
n/a
n/a