Fisher & Paykel AquaSmart Guide D'utilisation page 10

Installation instructions
US
8
CA
Unpacking
To ensure the best performance from your new AquaSmart™
clothes washer please follow the instructions below.
Removing the packaging
Remove the outer packaging.
1
Tilt the washer backwards and walk it off the base packer
2
one foot at a time (ensure the lid remains taped down).
Remove the base packer from under the washer by pulling
3
it out from the front.
Important!
Operating the washer when the base packer is in place can result in damage to the washer.
Ensure the base packer has been removed BEFORE OPERATING your washer.
Remove the tape, lift the lid and remove the basket packer from the basket.
4
Remove the hoses and accessories.
5
Keep the base packer and basket packer in case they are required for future transit.
6
Installation
In your clothes washer you will find:
1 hose guide.
■ ■
2 inlet hoses.
■ ■
4 rubber foot inserts (if not already inserted into the feet of your washer).
■ ■
1 User Guide.
■ ■
Refer to page 6 for location installation requirements.
Fig.2 Tilt washer backwards
to remove base packer