Fisher & Paykel AquaSmart Guide D'utilisation page 42

Changing pre-set options
US
40
CA
Factory reset
You can reset your washer to the default settings it left the factory with.
To reset your washer to its factory settings:
Enter Option Adjustment mode (refer to page 36).
1
Select the EASY IRON cycle.
2
The display will show "rSt". Touch START / PAUSE for 3 seconds to reset your washer to its factory
3
settings.
Note: this action will reset the washer to the default settings, exit Option Adjustment mode and
power off your washer.
Touch POWER to exit if you do not wish to reset your washer.
Fig.28 Changing the washer settings back to the factory default
Remember, to save changes and exit from the Option Adjustment mode at any time (ie to return
to normal operating mode), touch the POWER button.
Wash Temp
OOB Recovery
EOC Beeps
Factory Reset