Before You Begin - Bresser Tendence Mode D'emploi

INTRODUCTION
Thank you for selecting our slim Weather Forecaster. This device
combines precise time keeping, monitoring and displaying of pressure
information and current temperature/ humidity data from up to three
remote locations (additional sensors are required).
In this package, you will fi nd:
• One main unit (receiver)
• One single-channel remote sensor (transmitter)
• One user manual
Please keep this manual handy as it contains practical instructions,
technical specifi cations and precautions.
INSTALLATION
The communication between the main unit (receiver) and the remote
sensor (transmitter) is wireless, thus simplifying the installation. The
remote temperature sensor transmits data to the main unit, with an
operating range of up to 100 feet (30 meters) in opened area.
The remote temperature sensor can be placed indoors or outdoors,
depending on the area where the temperature is intended to be meas-
ured. If you intend to measure outdoor conditions, place the remote
sensor outdoors.
NOTE:
• It is critical to power the remote sensor BEFORE setting up the main
unit.
• It is critical to power up and test communication between the remote
sensor and the main unit BEFORE permanently mounting if outside.

BEFORE YOU BEGIN:

• We recommend using alkaline batteries for the remote sensor and
the main unit. When the temperature falls below freezing point 32°F
32