Bresser Tendence Mode D'emploi page 49

MAINTANANCE
CHANGING BATTERIES
• If the low battery indicator lights up, replace batteries in the corre-
sponding unit.
• Do not mix old and batteries.
CLEANING
The main unit and remote sensors housings can be cleaned with a
damp cloth. Small parts can be cleaned with a cotton tip or pipe-clean-
er. Never use abrasive or corrosive cleaning agents or solvents. Do not
immerse electronic components in water.
TROUBLESHOOTING
Check here before contacting customer service.
Issue
Main unit
Remote sensor
PRECAUTIONS
This product is engineered to give you years of satisfactory service if handled
carefully. Here are a few precautions:
• Do not immerse the units in water.
• Do not clean the units with abrasive or corrosive materials. They may scratch
the plastic parts and corrode the electronic circuits.
• Do not subject the product to excessive force, shock, dust, temperature, or
humidity, which may result in malfunctions, shorter lifespan, damaged batter-
ies, and damaged parts.
Symptom
Radio Controlled Time
signal is not received
Cannot locate
remote sensor
Data does not match data
on the main unit
Place unit by the window and keep
it there overnight
Check batteries
Check location
Press and hold DOWN (▼) button
on the main unit to search for the
signal form the remote sensor
Initiate manual sensor search
(Press and hold DOWN (▼) button
on the main unit)
49
Solution
GB/IE