Bresser Tendence Mode D'emploi page 39

radiating heat (e.g. heating ducts or air conditioners) and areas with
interference from wireless devices (e.g. cordless phones, radio
headsets, baby monitoring devices and other electronics).
OPERATION
Once the main unit is powered, the display will show all available LCD
segments for a moment.
IMPORTANT: All of the display functions will be locked, allowing setting
your local altitude and pressure parameters by pressing the UP (▲) or
DOWN (▲) and MODE buttons. The locked display will show the pres-
sure icon and abbreviation "inHg" fl ashing in the Weather/ Pressure
Window, default time in Clock Window and channel 1's temperature
and humidity readings in Temperature/ Humidity Window.
If pressure and altitude are not confi gured during this time, the unit
will self-calibrate in a few minutes and show the default settings for the
pressure and altitude (sea level) and all remote weather sensors read-
ings.
GETTING STARTED
WEATHER FORECAST
This unit is capable of detecting the atmospheric pressure changes.
Based on collected weather data, it forecasts the weather for the next
12 to 24 hours.
When the
display
shows...
Forecast is... Sunny
NOTE: The weather forecast accuracy is approximately 70%.
The main unit display shows forecasted (predicted) not current condi-
tions. The SUNNY icon indicates clear weather, even when displayed
during the night-time.
Partly Cloudy
Cloudy
39
Rainy Heavy
Rainy
GB/IE
Snowy Heavy
Snowy