Bresser Tendence Mode D'emploi page 42

• Change local or sea level pressure units by pressing the UP (▲) or
DOWN (▼) buttons to select the pressure units. Choose from: inHg,
hPa/mBar or mmHg.
• Press MEM/ HISTORY to confi rm your selection.
• Press MODE button until the local altitude value will be displayed
• Press and hold MEM/ HISTORY until the altitude unit is fl ashing.
• Select the ALTITUDE unit:, meters or feet, by pressing UP (▲) or
DOWN (▼) buttons.
• Press MEM/ HISTORY to confi rm your selection.
VIEWING SEA LEVEL PRESSURE HISTORY
• In pressure mode, press MEM/ HISTORY button entering the sea
level pressure display.
• When the SEA LEVEL is displayed, press MEM/ HISTORY repeat-
edly viewing the sea level pressure history for the past 24 hours in 1
hour intervals.
• If no buttons are pressed for 5 seconds, the unit will automatically
return to the default Pressure and Weather Forecast Mode.
VIEWING PRESSURE, TEMPERATURE AND HUMIDITY CHARTS
The bar chart in Pressure Window can be confi gured to display a
historical data for the sea level pressure and temperature or humidity
for channel 1.
After selecting the Pressure Window, press and hold ALARM button
to toggle the bar chart between the sea level pressure with a word
"PRESSURE" displayed at the right bottom corner of the chart, tem-
perature with a thermometer icon and "CH1" and a humidity with "RH"
icon and "CH1".
42