Fisher & Paykel DCS 30 BGC Instructions D'installation Et Guide D'utilisation page 30

USING THE ROTISSERIE
WARNING!
Never have the grill burners (bottom burners) on during Rotisserie cooking. It will burn your meat and make it
very dry. Use only one section at a time, grill or rotisserie.
PREPARATION
Recommended:
Dental floss or butcher string, scissors, broiler pan (bottom only), pliers, instant read thermometer, foil, and hot
pads.
Working Area:
Allow enough space to accommodate food and rotisserie rod
assembly in a clean environment.
Meat Preparation:
Tie meat with butcher string or Dental floss in three areas. Buy
a roast that is equally balanced from top to bottom in size. The
meat will cook more evenly while on the Rotisserie. For Poultry,
tie wings and legs to the body using Dental floss or butcher
string to prevent flopping around while turning. (Fig. 44)
1. Determine the center placement for the food, put first prong on
the rod, turn 'L'- shaped screw to tighten.
2. Center tied meat/poultry on the rod, place second prong, turn
'L'- shaped screw to tighten. (Fig. 45)
3. Pick up the rod, rotate it to check for balance. If not, adjust prongs and food to balance. Take pliers and tighten
the 'L'- shaped screws on both sides of the prong.
4. Remove grates and top rack on the grill. Place bottom portion of broiler pan on ceramic rods, so meat drippings
can be caught in pan. (Fig. 46)
(BH1-30R MODELS ONLY)
FIG. 45
28
FIG. 44
FIG. 46