Fisher & Paykel DCS 30 BGC Instructions D'installation Et Guide D'utilisation page 21

INSTALLATION
GAS HOOK-UP
STEP 1
Place the tank restraint in the island (Fig. 25).
STEP 2
Locate the tank restraint in the island within the recommended area
(Fig. 24 and 26).
STEP 3
Once located, secure to the bottom of the island using all eight hole
locations provided on the restraint. Wood screws can be used for
wooden floors or 1/4 inch diameter anchor screws or bolts may be
used if the floor is concrete or masonry (Fig. 27).
STEP 4
When secure, place the LP cylinder into the tank restraint making
sure to seat the tank all the way down, securely affixing the tank in
the restraint (Fig. 28).
STEP 5
Attach the regulator hose assembly and operate the grill normally as
described in the manual (Fig. 29).
FIG. 28
19
FIG. 25
FIG. 26
FIG. 27
FIG. 29