Operating Instructions - NEC MultiSync 20WMGX2 Manuel De L'utilisateur

Operating Instructions

MENU/EXIT SELECT
Main power switch
RESET/DV MODE
Power Button
POWER button
Turning Power On and Off
To turn the LCD MONITOR power ON/OFF, press the
POWER button or the ON/OFF button on the remote
control.
The power lamp will light and turn Blue and the LCD
MONITOR will turn on.
• Note: In order to power on the monitor, the
Main Power Switch at the back of the unit must be in
the ON position.
Power
lamp
Off The Main Power Switch is ON but the monitor hasn't been
activated by using the front Power button or the remote.
Blue When the Main Power Switch is ON, and the POWER
button on the remote control or the front POWER button is
used to turn the power on.
Amber When the Main Power Switch is ON, the monitor is
powered up, and the computer is in power save mode.
When the indicator lamp lights Amber or the message
"No Signal" appears on the screen, there is something
wrong with the incoming signal.
See Trouble Shooting.
CAUTION
• Avoid repeatedly turning the LCD MONITOR on and
off. Failures might result from doing so.
• If a power failure occurs while the main unit is running,
the monitor will turn on when power returns.
To prevent the power from returning unexpectedly,
possibly causing damage. After a power failure
occurs, turn off the Main Power Switch for 30 seconds
to reset the unit.

Indication