Component Names And Functions - NEC MultiSync 20WMGX2 Manuel De L'utilisateur

Component Names and Functions

MENU/EXIT
1
1 Menu/Exit
2 4 Direction Key
3 Select
4 RESET/DV Mode
5 Power LED/IR Receiver
6 Power Switch
7 Volume
8 Headphone Jack
1 Antenna
2 AV1
3 AV2
4 USB Downstream Port (2)
5 USB Downstream Port (2)
6 USB upstream port
7 PC1
8 PC2
9 Audio In
10 Audio Out
11 DC Out
12 AC in
13 Main Power Switch
14 Kensington Lock Opening
SELECT
2 3
Open or Close the OSD menu.
Moves the OSD cursor in 4 directions.
When in OSD menu, enables OSD options.
When not in OSD menu, switches the input source being displayed.
When in the OSD menu, press this button to change settings back to the factory presets.
When not in OSD menu, press this button to switch DV Modes.
LED lights Blue – Power is ON.
LED lights Amber – Monitor is in "Power Saving Mode".
LED is off – Power is OFF.
IR receiver for remote control.
Turn on or off the main power.
Lower / Raise the sound volume.
Connect headphones to the monitor.
Connect to antenna or to cable
TV signal.
Connect Composite Video or
S-video input and audio.
Connect Component
Video and Audio.
Connect to USB device.
Connect to USB device.
Connect to USB device.
Connect to digital RGB input
(DVI-D).
Connect to analog RGB input
(mini D-sub).
Connect audio input from PC.
Output connection for speaker.
(Speaker comes connected)
DC connection for speaker.
(Speaker comes connected)
Connect power cord to monitor.
ON/OFF switch for the main
power. Monitor will not operate
when switch is in the off position.
Monitor can be secured using a
Kensington locking system
RESET/DV MODE
4 5
ON Position
OFF Position
7
12 10
9
13 11

7
8
6
1
2
3
4
6
8 14
5