Use; Starting The System And The Screen; Settings From The Menu - Virax VISIOVAL VX Manuel D'instructions

REMARK! If required by your work position, you can pull the screen from the holder and
place it outside the case. The connection cable between the case and the screen is 2 m long.

9. Use

9.1.

Starting the system and the screen

Insert the SD card in the appropriate slot in your computer (32 GB max).
REMARK! If you do not use the memory card supplied, the card must be formatted from
the computer before use.
To format the card, proceed as follows:
• Insert the card in the appropriate slot in your computer.
• In your computer's explorer, select the memory card among the mobile devices, then right-
click and select 'Format'.
• Select FAT (standard) and 32 kilobytes, see technical data, chapter 4.6.)
• To start the unit, press briefly the ON/OFF key at the bottom of the control panel.
• Once the unit started, the outline of the start button is lit green. The video image appears
on screen after about 5 seconds
ON / OFF key
9.2.

Settings from the menu

Configuration menu
• Press the Menu key
The menu appears on the side of the screen
REMARK!
If you do not use the camera head supplied with the case, the menu may be deactivated.
63