Control Panels; On/Off Button; Commissioning And Use - Virax VISIOVAL Manuel D'instructions

Hold down the ON / OFF button for 2 to 3 seconds to switch on both the camera
and the screen. The screen switches on alone after around 5 seconds.
Visioval 294020

ON/OFF button:

-
Press and hold (2 to 3 sec): switches the Visioval on/off
-
Short press: resets the metric counter to zero (294030/294040)
-
Brief press while playing a film: Stop playback
PLAY MODE (Visioval 294030/294040)
Play key: - Play the recorded video film
- Pause function (during playback)
Central arrow buttons: Select the recorded video film.
External arrow buttons: browse the menu.
REC button: 2 sec: erase the video recording
RECORD MODE (Visioval 294030/294040)
REC button: 1 sec: start / stop video recording
ORIENTATION OF THE HEAD (Visioval 294040 only)
Central arrow keys: oscillation movements on 180°
Outside arrow keys: rotation movements on 360°
a) Operation with the batteries / electricity supply
The Visioval is delivered with 2 batteries. Only the slot in the top left enables the
Visioval to operate. The 2
batteries around.
The Visioval may also be powered by the mains (power unit provided).
II – Control panels
III – Commissioning and use
nd
slot is for storage. If the 1
Page
14
Visioval 294030/294040
st
battery is flat, swap the 2
-EN-