Virax VISIOVAL VX Manuel D'instructions page 40

TRANSLATION OF THE ORIGINAL MANUAL
Thank you for buying this Virax product and for the confidence you have shown in our products. Virax is a major
producer and seller of tools for the plumbing and air-conditioning trades, to assist you in your daily work: Virax:
express your talent
This documentation has been carefully produced so that you use the machine to the best of its potential
and in complete safety. You must read this instruction manual carefully before using the machine and
keep it close by at all times.
Safety instructions
Important instructions and warnings are presented by symbols.
Caution: Safety rules
Apply the following safety measures to ensure your protection:
Disconnect the tool before any work on the device; Thanks to modern manufacturing techniques, is
unlikely that your tool will be faulty or that a part will be missing. If, however, you do find a problem, do not
use the tool before the parts are replaced or the fault is corrected. Ignoring this rule may lead to causing
severe injury
The term "tool" in the warnings refers to your power tool supplied by the mains (with power cable) or running on
battery (without power cable).
®
Virax Visioval machines ref. 294035 / 294045 / 294050 / 294051 are intended only for professional use and therefore
may be used only by skilled persons. Always apply the rules of the art in usage in construction and public works.
General safety instructions
Important: Virax waives any liability for accidents occurring following a use of the machine other than the one it was
designed for.
1 Working zone safety
d) Keep the working zone clean and well lit. Cluttered or dark areas are prone to accidents.
e) Do not use power tools in explosive atmospheres, e.g. in the presence of flammable liquids, gases or dusts.
Electric tools create sparks which may cause dust or smoke to catch fire
f) Keep children and persons present away when using the tool. Distractions may cause you to lose control of the
tool.
2 Electrical safety
g) The electrical tool's plug must be adapted to the electricity socket. Never modify the plug in any way. Do not use
adapters with grounded power tools. Unmodified plugs and adapted sockets will reduce the risk of electric shock.
h) Avoid all physical contact with earthed surfaces, such as pipes, radiators, cookers and fridges. There is an
increased risk of electric shock if your body is connected to the earth.
i) Do not expose the tools to rain or damp conditions. Water entering the tool will increase the risk of electric shock.
j) Do not misuse the lead. Do not use the lead to carry, pull or disconnect the tool. Keep the lead away from heat,
lubricant, sharp edges or moving parts. Damaged or tangled leads increase the risk of electric shock.
k) When using a tool outdoors, use an extension suitable for outdoor use. Using a lead suitable for outdoor use
reduces the risk of electric shock.
l) If you cannot avoid using a tool in a damp location, use a power supply protected by a residual current
differential(RCD). Using an RCD reduces the risk of electric shock.
3 Personal safety
f) Stay alert, watch what you are doing and use common sense. Do not use a tool when you are tired or are under
the influence of drugs, alcohol or medication. Failure to pay attention even for a moment when using the tool may
cause serious injury.
40