Actions To Correct Abnormal Displays - Yamaha PDM-4220 Manuel Utilisateur

TROUBLESHOOTING (continued)

Actions to Correct Abnormal Displays

Depending on the kind of system equipment used, images may not be displayed normally. In this case, make the
adjustments suggested below. (only for RGB2)
Text displayed across the screen appears vertically streaked, with some characters blurred (Figure 1).
Symptom 1
(RGB input).
Figure 1
Example
1) Press the MENU button. The Main Menu will be displayed.
2) Press the
3) Press the OK button. The Setup Menu will be displayed.
4) Press the
Adjustment
When adjustment is not possible with Auto Adjust
procedure
5) Press the MENU button. The Main Menu will be displayed.
6) Press the
7) Press the OK button. The Setup Menu will be displayed.
8) Press the
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Horizontal Clock adjustment.)
9) Press the
10) Perform adjustment for symptom 2 below, when the characters are blurred on the entire screen.
• The display image may be momentarily disturbed during clock adjustment but this is not a failure.
Text displayed across the screen appears blurred in its entirety (Figure 2).
Symptom 2
A fine pattern flickers when displayed on the screen (Figure 3).
Figure 2
Example
1) Press the MENU button. The Main Menu will be displayed.
2) Press the
3) Press the OK button. The Setup Menu will be displayed.
4) Press the
Adjustment
When adjustment is not possible with Auto Adjust
procedure
5) Press the MENU button. The Main Menu will be displayed.
6) Press the
7) Press the OK button. The Setup Menu will be displayed.
8) Press the
(Display fine patterns as characters or a vertical striped pattern over the entire screen during Clock Phase adjustment.)
9) Press or
clean across the screen.
Vertical
Before adjustment,
streaks
some characters
are blurred.
ABCDEFGHIJ
ABC B
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
SELECT button and select Setup.
SELECT button and select Auto Adjust.
SELECT button and select Setup.
SELECT button and select Horizontal Clock.
or ADJUST buttons and search for clear characters over the entire screen.
Before adjustment
ABCDEFGHIJ
ABC ABC
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
After adjustment
ABC
SELECT button and select Setup.
SELECT button and select Auto Adjust.
SELECT button and select Setup.
SELECT button and select Clock Phase.
ADJUST buttons to make the text appear
After adjustment,
ABC
all characters appear
crisp now.
After adjustment,
ABC ABC
all characters are
blurred.
Figure 3
9) Press or ADJUST buttons to make the text appear
without flickering.
Before adjustment
After adjustment
45