Connecting To A Pc - Yamaha PDM-4220 Manuel Utilisateur

INSTALLATION INSTRUCTIONS (continued)

Connecting to a PC

(1) Make sure that the display signal of the personal computer to be used is compatible with the specifications of this
device.
• See "PRODUCT SPECIFICATIONS" concerning the specifications of this device
(2) Make sure that the power switch of the personal computer is turned off.
(3) Connect the signal input terminal (RGB 1 or RGB 2) on the rear panel of this device to the display signal output
terminal of the personal computer.
• Use a cable that fits the input terminal of this device and the output terminal of the personal computer.
• Depending on the type of personal computer being connected, the use of an optional conversion adapter or the adapter provided with
the personal computer may be necessary in some cases. For details, refer to the instruction manual of the personal computer or ask the
personal computer manufacturer or your local retail dealer.
Speaker (R)
Power
cord
Monitor (rear panel)
Power cable
connector
(DVI)
Connecting to a PC Device
To signal
output
terminal
(DVI)
• Setting
RGB1: DVI-PC
RGB2: RGB
For details, refer to
46 50
~ .
3.5mm
(D-sub)
Stereo
mini jack
To audio
To signal
output
output
terminal
terminal
(D-sub)
PC
49 50
Speaker (L)
15