Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
OPERATING INSTRUCTIONS (continued)
Displaying MULTI PICTURE (continued)
Activating the Split mode from the video input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• The speaker icon can be shifted left and right by pressing the
the video will be output from the side on which the speaker icon is located.
• The same video input mode cannot be selected for both screens at the same time.
• Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
• Refer to the table for 2 pictures (Split) mode.
Activating the MULTI PICTURE mode from the RGB input screen
Pressing the MULTI PICTURE button one time will display 2 pictures.
• This mode can be available from RGB1(DVI-PC) and RGB2(RGB) input.
• The speaker icon can be shifted up and down by pressing the
be output from the side on which the speaker icon is located.
• The sub-screen position can be selected up and down by pressing
• The sub-screen can be selected with the AV1
icon appears on the left side of AV✱ etc. as shown in the diagram to the right.
• Pressing the MULTI PICTURE button again will cancel the 2 pictures display.
• "Frequency Mode" in the Setup Menu should be set to Movie when sub-screen is the component signal of
1080i/50 or 1080i/60.
NOTE
• Even if the input of the horizontal / vertical synchronizing signal (or video signal) stops in the multi picture display, the mode will not change
to power save mode.
• Please be careful since image retention will occur if display is left in a multi picture display state for a long period of time.
2 pictures (Split)
Input terminal
Sub
TV
Main
TV
‡
PAL , SECAM
AV1
~AV5
‡
NTSC3.58/4.43
AV2
RGB
‡
AV3
576i, 576p
‡
‡
480i, 480p
‡
1080i/50
AV1
AV2
‡
1080i/60
720p/50
‡
720p/60
RGB1
STB
RGB2
‡
Component
4 pictures
Input terminal
Sub
TV
Main
TV
‡
PAL , SECAM
AV1
~AV5
‡
NTSC3.58/4.43
AV2
RGB
‡
AV3
‡
576i, 576p
‡
480i, 480p
‡
1080i/50
AV4
AV6
‡
1080i/60
720p/50
‡
720p/60
RGB1
STB
‡
RGB2
Component
NOTE
About 720p/50Hz
• 720p/50Hz can support for AV4, AV6, and RGB 1 (DVI-STB) only during the single picture mode.
• RGB2 (component) is not available for 720p/50Hz.
24
AV6, TV channel buttons from the status that the speaker
~
AV1~AV5
AV2, AV3
PAL
NTSC3.58
576i
RGB
SECAM
NTSC4.43
576p
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
AV1~AV5
AV2, AV3
PAL
NTSC3.58
576i
RGB
SECAM
NTSC4.43
576p
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
and
SELECT buttons. The audio of
and
SELECT buttons. The audio will
and
SELECT buttons.
AV1: Displays the VIDEO input signal of the sub-screen.
AV4, AV6
480i
1080i/
1080i/
720p/
720p/
480p
50
60
50
60
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
‡
AV4, AV6
480i
1080i/
1080i/
720p/
720p/
480p
50
60
50
60
AV1
RGB2
AV1
RGB1
RGB2
TELE
STB Component
TEXT
Main
‡
(‡ : available)
RGB1
RGB2
TELE
STB Component
TEXT
Main
(‡ : available)
AV2
(Sub-
screen)
Sub
Sub 1
Sub 2
Sub 3
Publicité
Chapitres
Table des Matières
