Function Menu - Yamaha PDM-4220 Manuel Utilisateur

OPERATING INSTRUCTIONS (continued)

FUNCTION MENU

Picture
MENU
Audio
Timer
Function
Setup
Language
Select
OK Set
Selected characters
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Panel Life
Luminance Manager
Reset
32
Function
Screen Saver
Screen Wipe
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Panel Life
Luminance Manager
Reset
Off 5Min.
60Min. 40Min.
On
Off
Off
Split Strobe
Panoramic 4:3
Normal Extend 1
Off
(off the function) (waiting to reset)
Off
On 60Min.
Off
Off
Split
Panoramic
Nomal
Off
Reset
Select Set Return
This moves the picture around the screen in small amount, at set
10Min.
intervals, to reduce the panel image retention. This is where
20Min.
stationary objects, such as screen logos, leave a slight image
visible after they should have disappeared.
This is used to reduce the panel image retention that can occur
with stationary pictures by the white field signal. Select On
60Min (continuous operation) or 60 Min. (time limit operation) and press
the OK button. Press the MENU or RETURN button on the remote
control to return to normal viewing.
This turns the grey sidebars to the black sidebars when watching
normal mode screen size area. It is always set to Off when the
On
monitor powered On. It is recommended to set to Off to reduce
the panel image retention.
This is used to reduce power consumption for video input when
On
there is no video signal. Setting it On will lead the monitor to the
standby mode when the AV input with no signal is selected.
This selects the display condition of the FREEZE mode between
Split (2 pictures) and Strobe (12 pictures).
14:9zoom
This selects the screen display size of TV input that appears first
when the main power turned on.
This function is to surppress the contrast of the screen regardless
of the Contrast setting in the Picture Menu. By this control, power
Extend 2
consumption can be reduced or degradation of a panel can be
mitigated. The order of power consumption is Extend 2 < Extend 1
< Normal.
If the Contrast setting is changed when this item is set to Extend 1
or 2, it will be changed to Normal automatically.
This is used to reduce the panel image retention which is caused
On
by especially displaying TV station logo.
Brightness of 4 corners of the panel gets lower than the centre.
The original factory settings for the items of this Menu page can
be restored by pressing the OK button.
Setup hint