Troubleshooting
Problem:
Cause/Solution:
The equipment
Maximum tanning time has been exceeded.
does not work.
A safety switch has responded:
• Have the filter panels been closed?
The equipment is overheating:
• Lower section: Check the filter and clean
or replace as necessary.
• Canopy: Check the filter and clean or
replace as necessary.
• Leave the equipment to cool down and
then restart.
Some of the
Lamp or starter is defective.
lights are not
• Replace the lamp or starter.
working.
58
If the equipment still does not work or if another problem arises,
Page
please contact the customer service division at:
40
Global Service Division
45
#1 Walter Kratz Drive
Jonesboro, Arkansas 72401
46
800 445 0624
36, 38