Turn Off The Engine; Maintenance; Maintenance-Chart - Zipper ZI-STE2000IV Mode D'emploi

11.4

Turn off the engine

Normal use:
1. Turn off all the installations that are connected,
and unplug the plug (Fig. W)
2. Turn the switch (Fig. X) of the plug to the
"OFF" position.
3. After the engine is totally cooled, turn the ventilating pole of the fuel-burning lid to the
"CLOSE" position counter-clockwise (Fig. Y).

12 MAINTENANCE

The purpose of making maintenance and
adjustment plan is to keep the generator in the
best working condition.
Please check and maintain the generator
according to the plan in the following chart.
Please turn off the engine before you carry out
any repair. If the engine needs to run when
repairing, make sure the operating area is well
ventilated, as the exhaust contains toxic CO.
12.1

Maintenance-chart

Please maintain the generator in specified months or hours either month or hour is ok
(1). If used in dirty places, the generator should be maintained more regularly.
(2). Unless the user has proper tool or he is a specialist on machine, the maintenance of the above
items should be done by the authorized agent. Please refer to the handbook.
(3). When it is used for business purpose, you should write down the operating hours of the
generator to confirm the correct maintenance cycle.
ZIPPER MASCHINEN GmbH
ZI-STE2000IV
www.Zipper-Maschinen.at
If you want to stop the engine
urgently, turn the switch of the
engine to the "CLOSE" position.
Please use authentic
components of ZI-STE2000IV or
other substitutes with the same
quality.
The unqualified components will
damage the generator.
The plan chart for maintenance
I M P O R T A N T
MAINTENANCE
I M P O R T A N T
A T T E N T I O N
39