Taking Measurements - Tanita InnerScan DUAL Manuel D'utilisation

Masquer les pouces Voir aussi pour InnerScan DUAL:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Taking Measurements

1.
When the monitor power is off, select "Input Data" in the app and
then follow the instructions in the app.
When "0.00kg" (0.0lb, 0.0stlb) is displayed, step onto the monitor.
2.
Measurement data is automatically sent to the iPhone.
If there is unsent data stored on the monitor, that data is also sent to the iPhone.
Note:
• When taking measurements while holding your iPhone, enter the weight that you want to
subtract into the "Smartphone's weight" section in the dedicated app before taking
measurements.
• The weight that you entered to be subtracted from your weight is displayed.
• The "Smartphone's weight" can be entered up to -2.00kg (-4.4lb, -4lb).
• The maximum weight (weighing capacity) is reduced by the amount entered for
the "Smartphone weight".
If you do not have your iPhone when taking measurements
Simply step onto the monitor. The auto-recognition feature will automatically recall your personal
Simply step onto the monitor. The auto-recognition feature will automatically recall your personal
data. Your monitor will store up to 10 sets of measurements.
Saved data is sent to the iPhone together with new measurements the next time the iPhone is
connected to the monitor when taking measurements.
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rd-901

Table des Matières