Prepare The Remote Transmitter - SportDOG Pistol Grip Trainer SDT30-11226 Manuel D'utilisation

Step

Prepare the Remote Transmitter

1
Inserting 9-Volt Battery
1. Remove the panel from the side opposite of the
knob and toggle switch. Note: The screws have been
"captured" to allow them to stay in the panel once they
have been loosened.
2. Connect the battery to the 9-volt battery connector.
3. Insert 9-volt battery and secure the panel. Note:
Make sure the wires are in the housing before securing
the panel to the case. This will allow the transmitter to be
consistently waterproof.
Note: Approximate battery life will be 6-12 months,
depending upon frequency of use.
Transmitter Indicator Light
Remote Transmitter Function
Continuous Stimulation button pressed
Momentary (Nick) Stimulation button pressed
Low battery – Continuous Stimulation
button pressed
www.sportdog.com/international
Indicator Light Response
Solid in color
Single fl ash
Flashes continuously
5