Connections And Driver Installation (Macintosh) - Edirol AudioCapture UA-1A Mode D'emploi

Connections and driver installation (Macintosh)

* If you are a Windows user, refer to p. 9.
In order to use the UA-1A, you must first install a driver. UA-
1A uses a driver included with Mac OS.
Known issues: UA-1A
• Some applications such as Cakewalk's Metro Series
and TC Work's Spark Series cannot record/playback
at 48 kHz. Please use the UA-1A at 44.1 kHz.
• While the audio application is recording or playing,
do not connect/disconnect the USB cable. Doing so
may cause the application to freeze.
• You may hear sound hopping and/or noise when
you record and play back at the same time due to
high load on the CPU. However, the noise should
not be in the recording itself. Such noise should only
be found in the playback signal.
• If you are going to use the Virtual Sound Canvas 3,
you will need to select [Performance] from the
[Setting] menu, and set the Expression Mode to
Response Priority.
• The standard driver that comes with Mac OS is not
ASIO compatible.
• When you start up your computer with the UA-1A
connected, the computer may become unstable. If
this occurs, start up your computer before
connecting the UA-1A, and connect the UA-1A after
start-up.
What is a driver?
-> p. 9
19