Edirol AudioCapture UA-1A Mode D'emploi page 17

Deleting the USB Audio Device driver
If re-installing the USB Audio Device driver
If installation of the USB Audio Device
driver was terminated before completion
Use the following procedure to delete the driver that is
already installed.
1
Use a USB cable to connect the UA-1A to your
computer.
2
Click the Windows [Start] button, and select
[Settings] - [Control Panel].
3
In [Control Panel], double-click [System] to open the
System Properties dialog.
4
Click the [Device Manager] tab.
5
Double-click [Sound, video and game controllers]
to see a list of the devices.
6
From the list, select USB Audio Device, and click
[Remove]. In the Confirm Device Removal dialog
box, click [OK]. If USB Audio Device is not
displayed, proceed to step 8.
7
Make sure that USB Audio Device is not in the
Sound, video and game controllers list, and click
[Close] to close the System Properties dialog.
Connections and driver installation (Windows)
The explanation provided
here is for an average
Windows system.
Depending on your
computer, some of the
folder names may be
different.
If a dialog box
suggesting that you
restart Windows
appears at this point,
follow the suggestion
and restart your
computer.
17