Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
In the Windows Control Panel, double-click [System] to open the
System Properties dialog box, and click the [Device Manager] tab.
2.
Double-click [System devices] to see the list of devices.
3.
From the list, select [Advanced Power Management support], and click
[Properties] to access the Advanced Power Management support
properties dialog box.
4.
Click the [Settings] tab, and in Troubleshooting, check the [Disable
power status polling] check box. Then click [OK].
5.
In the System Properties dialog box, click [OK] to close the dialog box.
6.
Restart Windows.
Noise is present in the playback or recording
Depending on the virtual memory setting or network-related settings, noise
may occur.
Please make the following settings before use.
•
In "Chooser" of the Apple menu, set AppleTalk to "Inactive."
(This setting is not changed as a result of turning off AppleTalk, as requested
by OMS when sequencer software is started up. You must change the setting
yourself using the "Chooser.")
•
In the "Memory" Control Panel, set Virtual Memory to "Off."
•
Depending on the way in which you connect to the Internet, use
the UA-1A with the following settings.
•If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
•If you connect to the Internet via the internal modem port, or are not
connected to the Internet
In the "TCP/IP" Control Panel, set "Connect via" to "PPP."
After you have made the settings, restart your Macintosh.
*
Do not use software that accesses the network (such as a Web browser) at the same time that
you are using sequencer software or audio editing software
Noise is present in the recorded sound
•
It has been found that noise tends to be introduced in sound
recorded on the iMac series models, which were released after
the summer of 2000.
•
In the SimpleSound application that is included with MacOS, noise
will be heard in the sound if it is played back immediately after
being digitally recorded. Save the sound first, then try playing it
back.
Troubleshooting
29
Publicité
Table des Matières
Dépannage
