Edirol AudioCapture UA-1A Mode D'emploi page 25

The "Add New Hardware Wizard" dialog box
appears even though you installed the drivers
If your computer or USB hub has two or more USB connectors, connecting the
UA-1A to a USB connector to which the UA-1A has never before been
connected may cause the Add New Hardware Wizard dialog box will appear
even though the drivers have already been installed. Install the drivers once
again as described in Connections and driver installation (Windows) (p. 9).
This is not a malfunction.
Drivers are not installed correctly
Use the procedure described in Deleting the USB Audio Device driver (p. 17)
to delete the USB Audio Device driver installed in your computer, and install
the UA-1A drivers once again as described in Connections and driver
installation (Windows) (p. 9). Check whether there is an item named
"Unknown Device" in "Other devices" or in "Universal Serial Bus
controllers."
If you find "Unknown Device," delete it.
A dialog box saying "Unknown Device found"
appears, and I can't install the driver
Depending on your computer, not all of the Windows 98 files required to
support audio over USB may have been installed when the computer was
shipped.
Please check with the manufacturer of your computer.
Problems when using the UA-1A
OS becomes unstable
• Starting up a computer when the UA-1A is already connected may
cause the computer to become unstable.
If this occurs, start up the computer with the UA-1A disconnected, and then
connect the UA-1A.
No sound
• Are you attempting to use the CD player of your computer to play
an audio CD?
If you wish to play an audio CD on the CD-ROM drive of your computer, refer
to When using your computer's CD-ROM drive to play an audio CD, or
when playing background music for games with the UA-1A. (p. 16).
Troubleshooting
25