During Cooking; Cleaning And Maintenance - TEFAL NutriCook P42207 Guide De L'utilisateur

• Close the NutriCook.
• Move the selector to one of the programmes as
shown in your recipe book.
• Programme the timer for the cooking time shown
for your recipe.
• Place the NutriCook on a heat source set to
maximum power.
Just like for any
other cooking
appliance, always
pay close attention
to it, especially
when using
NutriCook near
children.
The steam jet
coming from the
steam release outlet
(A) is very hot.
Finishing cooking
• At the end of the soft pressure cooking phase, the third
signal sound from the timer indicates that cooking has
ended.
• Check that the pressure indicator (D) has dropped back
down.
• Raise the Open/Close handle to the vertical position to
open the lid.

Cleaning and maintenance

• For best operation, be sure to follow these cleaning
and maintenance recommendations every time
the NutriCook is used.
• After each use always wash the NutriCook as
directed below. Wash the basket in warm water
with a little washing up liquid.
50
Fig. 9
Fig. 10
.
• When the first signal sounds, the timer tells you to
reduce the heat.
Pressure cooking starts and the timer counts down.
• At the end of the pressure cooking stage, when the
second signal sounds, the timer tells you to switch
off the heat and set the cooking programme
selector to
• A jet of hot steam, and possibly droplets of water,
escape from the steam outlet (A) in a vertical
direction.
The soft pressure cooking phase starts (this time is
ready programmed).
• If you accidentally open your NutriCook during the
soft cooking phase, close it back up immediately, and
this will have no effect on cooking.
• Never remove the timer during the pressure cooking
or soft pressure cooking phases.
Fig. 1
.
Fig. 8.
.
Always position the
NutriCook so that
the programme
selector (F) faces
you.

During cooking

To move
NutriCook, use
the carrying
handles on the
side of the
cooker.
Never leave food in
the NutriCook.