ECOFOREST VAP 30 Manuel D'installation Et Maintenance page 38


Heat flow. (See technical features).

Heating return. (See technical features).
Safety valve discharge.

features).

Charge-discharge. (See technical features).
Drain siphon.
Normally closed valve
Water main.
To access the purgecock, we must remove the cap of the liner covering it and the safety thermostat. It is
located in the upper left side of the boiler. It is important to note that the purge should be performed by an
authorized installer.

Purger.
WI-FI ANTENNA CONNECTION, POWER CABLE, ROOM THERMOSTAT, KEYBOARD AND KEYBOARD SUPPORT.
The boiler is supplied with a Ecoforest box. This box contains the user manual, the installation and
maintenance manual, a power cable, a room sensor, a cleaning brush, a Wi-fi antenna.
The user has to attach the wi-fi antenna and module to the connection platform (check section 1 of the
tablet manual). The connection platform of the wi-fi antenna is supplied attached to the rear of the hopper.
The room sensor and power cable must be connected to the rear heaters, in the right-hand side of the boiler.

Power connection ~230/240V - 50Hz.

Thermostat connection.
(See technical
HEATING SYSTEM DRAINING (VERY IMPORTANT).
37
Drawing 12
Drawing 13
Drawing 14