Christie LWU701i Manuel D'utilisation page 140

Supported signals
Supported signals for SDI
Resolution (H x V)
720 x 480i
720 x 576i
1280 x 720p
1920 x 1080i
1920 x 1080sf
1920 x 1080p
Only support 3G-SDI Level-A signal.
NOTE
• Be sure to check jack type, signal level, timing and resolution before connecting this
projector to a PC.
• Some PCs may have multiple display screen modes. Use of some of these modes is not possible with this
projector.
• Depending on the input signal, full-size display may not be possible in some cases. Refer to the number of
display pixels above.
• The signal is converted to the projector's panel resolution before being displayed. The best display
performance is achieved if the resolutions of the input signal and projector panel are identical.
• Automatic adjustment may not function correctly with some input signals.
• The image may not be displayed correctly when the input sync signal is a composite sync or a sync on G.
• The illustrations in this manual are for illustrative purposes. They may differ slightly from your projector.
LWU701i/LW751i/LX801i/LWU601i/LW651i
User's Manual - Technical
Signal mode
480i
576i
720p (50Hz)
720p (60Hz)
1080i (50Hz)
1080i (60Hz)
1080i (25Hz)
1080i (30Hz)
1080p (50Hz)
1080p (60Hz)
H. frequency V. frequency
(kHz)
15.7
15.6
37.5
45
28.1
33.8
28.1
33.8
56.3
67.5
6
Rating
(Hz)
60 SMPTE
50 SMPTE
50 SMPTE
60 SMPTE
50 SMPTE
60 SMPTE
50
SMPTE
60 SMPTE
50
SMPTE
60
SMPTE
020-000789-01
LIT MAN USR D2 TECH GUIDE