Loewe Assist HomeCinema Mode D'emploi page 18

Operating other units
Code entry
Remote control codes for known units (see list from page 95) can be selected
from the integrated database. The four TV, STB, DVD and AUDIO buttons can
be set for the operation of various units.
➠
The TV button can only be set with the codes from the TV list. The STB,
DVD and AUDIO buttons can only be set with the codes from the STB
list.
Reading out the code
You can read out the currently set code. The numbers of the code are displayed
by the flashing of the LED above the particular button for the unit.
- 18
Press the TV, STB, DVD or AUDIO button and at the
same time press the OK button for 5 seconds.
The LED above the button for the unit (e.g. TV) flashes
twice.
Enter the three digit code (list from page 95).
The LED above the button for the unit (e.g. TV) flashes
once.
To end the programming mode, press the OK button
again.
The LED above the button for the unit (e.g. TV) flashes
twice.
Press the TV, STB, DVD or AUDIO button and at the
same time press the OK button for 5 seconds.
The LED above the button for the unit (e.g. TV) flashes
twice.
Press the INFO button.
The LED allocated to the button for the unit displays the
three digit code by flashing several times. The numbers
are displayed from left to right in three flashing
sequences. Examples:
The number 1 is for example displayed by one flash.
The number 6 is for example displayed by six slow
flashes.
The number 0 is displayed by five quick flashes.