User Instructions Fcc Part 15 - Radio Frequency Devices (For U.s.a. Users); Interference-Causing Equipment Standard (Ices-003 Issue 5) (For Canada Users) - Konica Minolta Workplace Hub Guide Rapide

Table des Matières

Publicité

1
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY DEVICES
(for U.S.A. users)
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause harmful inter-
ference to radio communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
7WARNING
-
The design and production of this unit conform to FCC regulations, and any changes or modifications
must be registered with the FCC and are subject to FCC control. Any changes made by the purchaser
or user without first contacting the manufacturer will be subject to penalty under FCC regulations.
-
This device must be used with a shielded interface cable. The use of non-shielded cables is likely to
result in interference with radio communications and is prohibited under FCC rules.
7CAUTION
-
To maintain compliance with FCC's RF exposure guidelines, use only the supplied antenna.
-
Unauthorized antenna, modification, or attachments could damage the transmitter and may violate
FCC regulations.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired
operation.
"Contains FCC ID: QIPPPLS8-US, RYK-WPEA362CN, SQK-7BLZXX"
INTERFERENCE-CAUSING EQUIPMENT STANDARD (ICES-003 ISSUE 5)
(for Canada users)
This Class A digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the
device.
L'utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) l'utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu même
si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
Canadian Radio Interference Regulations
This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as
set out in the interference-causing equipment standard entitled "Digital Apparatus", ICES-003 of the Industry
Canada.
Cet appareil numérique respecte les limites de bruits radio éléctiques applicables aux appareils numériques
de Class B prescrites dans la norme sur le matériel brouilleur :
"Appareils Numériques", NMB-003 édictée par l'Industrie Canada.
"Contains IC: 7830A-PLS8US, 6168A-WPEA362ACN, 337L-7BLZXX"
1-12
Déclarations réglementaires
Workplace Hub
1.3

Publicité

Table des Matières
loading

Table des Matières