Using Optional Equipment
Connecting optional equipment
You can connect a wide range of optional equipment to your TV. Connecting cables are not supplied.
Connecting to the TV (front)
KDS-55A2000
Headphones
KDS-70R2000
HDV camcorder with
component output
For service use only
HDV camcorder with
component output
S VHS/Hi8/
DVC camcorder with
composite output
S VHS/Hi8/
DVC camcorder with
composite output
Push up to open
the front panel
using the small lip
on the panel.
Headphones
To connect
Do this
HDV camcorder
Connect to the component video Y,
with component
P
/C
B
B
output A
audio L (MONO), R sockets
S VHS/Hi8/DVC
Connect to the composite video
camcorder with
socket
composite output
sockets
B
mono equipment, connect to the L
socket
Headphones C
Connect to the i socket to listen to
sound from the TV on headphones.
Conditional Access
To use Pay Per View services. For
Module (CAM) D
details, refer to the instruction
manual supplied with your CAM.
To use the CAM, press the eject
button and remove the "dummy"
card. Switch off the TV when
inserting your CAM into the CAM
slot. When you do not use the
CAM, we recommend that the
"dummy" card be inserted and
kept in the CAM slot.
Note
CAM is not supported in all
countries. Check with your
authorized dealer.
Tip
You can select the front socket input signals by setting "AV7
Input" in the "AV Set-up" menu (page 34).
, P
/C
sockets
7 and
R
R
7.
7, and the audio
7. If you connect
7.
Continued
43
GB