Sound menu
Target Inputs
Sound Mode
Reset
Treble
Bass
Balance
Auto Volume
Volume Offset
Surround
BBE
28
GB
For the input currently being viewed, select whether to use the common setting or to
set each item separately.
"Common": Applies common settings whose adjustments are shared with other
inputs in which "Target Inputs" is set to "Common".
Current input name (e.g. AV1): Allows you to set each option separately for the
current input.
Tip
Common
Set each input to "
Selects the sound mode.
"Dynamic": Enhances treble and bass.
"Standard": For standard sound. Recommended for home entertainment.
"Custom": Flat response. Also allows you to store your preferred settings.
Resets all the "Sound" settings except "Target Inputs", "Sound Mode" and "Dual
Sound" to the factory settings.
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasizes left or right speaker balance.
Keeps a constant volume level even when volume level gaps occur (e.g. adverts tend
to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs, when "Target
Inputs" is set to the current input name (e.g. AV1).
Selects the surround mode.
"Dolby Virtual": Uses the TV speakers to simulate the surround effect produced by
a multi channel system.
"Off": For normal stereo or mono reception.
Gives sound more impact by compensating for phase effects in speakers using the
"BBE High Definition Sound System", when "Sound Mode" is set to "Custom".
You can select the options listed below on the Sound
menu. To select options in "Settings", refer to "Picture
menu" (page 25).
" if you require the same settings to apply to each input.