Sony BRAVIA KDS-70R2000 Mode D'emploi page 26

Advanced Iris
Contrast
Brightness
Colour
Hue
Colour Temperature
Sharpness
Noise Reduction
26
GB
By selecting the iris option, you can obtain the best brightness and contrast suited for
your TV viewing.
"Auto 1"*: Recommended option for viewing programmes that have larger variation
in brightness from scene to scene.
"Auto 2"*: Recommended option for viewing programmes that have less variation
in brightness from scene to scene.
"Max": With this option, the screen has maximum level of brightness. It is suitable
for TV viewing in a brightly lit room.
"High": With this option, the screen becomes bright. It is suitable for TV viewing in
a brightly lit room.
"Medium": With this option, the brightness is about the standard level.
"Low": With this option, the screen brightness dims and increases in contrast. It is
suitable for TV viewing in a room with low lighting.
"Min": With this option, the screen is dimmed but contrast is at a maximum. It is
suitable for TV viewing in a room with low lighting.
* Automatically detects the brightness of the screen. These options are best suited for
programmes such as movies that often change between bright scenes and low light setting
scenes.
Note
"Advanced Iris" is not available when using Freeze or PAP features.
Increases or decreases picture contrast.
Brightens or darkens the picture.
Increases or decreases colour intensity.
Increases or decreases the green tones and red tones.
Tip
"Hue" can only be adjusted for an NTSC colour signal (e.g. U.S.A. video tapes).
Adjusts the whiteness of the picture.
"Cool": Gives the white colours a blue tint.
"Neutral": Gives the white colours a neutral tint.
"Warm 1"/"Warm 2": Gives the white colours a red tint. "Warm 2" gives a redder
tint than "Warm 1".
Tip
"Warm 1" and "Warm 2" can only be selected when you set "Picture Mode" to "Custom".
Sharpens or softens the picture.
Reduces the (snowy picture).
"Auto": Automatically reduces the .
"High"/"Medium"/"Low": Modifies the effect of the noise reduction.
"Off": Turns off the Noise Reduction feature.
"BNR": Reduces the block. This is effective for digital channels, or a connected
DVD player/digital receiver with MPEG playback.
Tips
• "Auto" is not available when watching component, HDMI or digital RF inputs.
• "Noise Reduction" is not available when using Freeze or PAP features.