Recover Factory Setup - OHAUS STARTER 3100C Manuel D'instructions

STARTER 3100C Bench Conductivity Meter
Note:
You have to finish pressing all five keys within two minutes, otherwise Err 1 appears and you will
have to repeat the procedure.
5.4

Recover Factory Setup


When the meter is off , press and hold
seconds, the screen displays

Press
then restart the meter.

Or press
and blinks, means "Reset". Then we have 2 choice:
to reset factory settings (MTC, slope and offset, etc.), display
to quit the setting, display
& &
then turn off the meter.
EN-15
together for 3