Thanks for choosing the Ninebot eKickScooter (referred to as the kickscooter in this manual)!
The kickscooter is specially designed for smooth and safe riding. It combines the power of electricity
and the style of a traditional kickscooter. Enjoy an effortless gliding experience on this cool kickscooter.
1. Parts and Functions
Handlebar
Stem
Clamp
Front wheel
Indicator
Ambient light
Charging port
Power button:
Place a single foot on the footboard to start the kickscooter, then you will hear one beep as the
prompt. Take both feet o the footboard for 30 seconds and the kickscooter will automatically power
o .
Rear fender:
Switch speed mode:
In the power-on state, when the kickscooter is still, step the rear fender twice
●
to switch the speed mode.
● Brake: When riding, step on the rear fender to brake.
Accessories:
Battery charger
3/16"(5 mm) Allen wrench
Footboard/Power button
Rear fender
Reflector
Hub motor
01
Indicator
The color of the indicator shows the battery level or abnormality.
≥ 10%
Battery level
< 10%
Indicator color
white
red
Note:
When the battery level is below 10%, the indicator will stop flashing.
The flashing way of the indicator shows di erent speed mode.
Speed mode
First-gear speed
Second-gear speed
Max. speed
5.0 mph (8 km/h)
6.2 mph (10 km/h)
Indicator
solid, with 1 beep
blink slowly, with 2 beeps
Prompt Indication
State
Not activated
Battery temperature too high
Battery temperature too low
Speed>7.5 mph (12 km/h)
Battery level: < 10%
Pull out and plug in the charger
Power on
Power off
Not activated or abnormality alert
red
Third-gear speed
7.5 mph (12 km/h)
blink fast, with 3 beeps
Prompt
3 short beeps (continuously)
2 short beeps and 1 long beep (continuously)
2 short beeps and 2 long beeps (continuously)
2 long beeps (continuously)
2 short beeps
1 short beep
1 short beep
1 long beep
02