Parts And Functions; Assembly - Ninebot eKickScooter ZING C8 Mode D'emploi

2 Parts and Functions

Please familiarize yourself with each part. This manual uses C10 as an example and pictures are for illustration purposes only.
The actual product may vary.
Brake lever
Handlebar
Stem
Quick-release
clamp
Front fender
Indicator
Hub motor
Charging port
Footboard
Kickstand
Power button
Press the button to power on or change riding modes. The Turbo mode is set as default when turned on. Hold for 2s
to power off.
Model Turbo mode
ZING C8 10 mph (16 km/h)
Max. speed ZING C10 10 mph (16 km/h)
ZING C20 10 mph (16 km/h)
Indicator solid, with 1 beep
Ambient light (for ZING C10 and C20 only) full-colour pulsing
Battery indication
The color of the indicator shows the battery level: ＞10% white, ≤10% red.
* When an abnormality occurs, the indicator will flash and an alarm will start beeping.
03
Power button Accessories
Throttle
Battery charger×1
Folding clamp
* For ZING C20 only.
Safety clamp
* For ZING C20 only.
Buckle
* For ZING C20 only.
Rear fender
5 mm Allen wrench
Reflector
* For ZING C20 only.
Brake
Cruise mode Safe mode
10 mph (16 km/h) 6.2 mph (10 km/h)
10 mph (16 km/h) 6.2 mph (10 km/h)
10 mph (16 km/h) 6.2 mph (10 km/h)
blink slowly, with 2 beeps blink fast, with 3 beeps
blue pulsing red pulsing

3 Assembly

ZING C8, ZING C10
1 2
Press the quick-release button Flip the quick-release clamp
and insert the stem into the to the closed position to
front fork. The button will pop secure the stem.
out automatically.
Quick-release
button
ZING C20
1 2
Insert the stem to the bottom. Lock the folding clamp
flip the safety clamp
closed position.
WARNING
Power off the scooter before assembling. The brake cable should not wrap around the stem.
NOTE: If the stem is shaky,
you can adjust the knob to
tighten it.
Tighten the two bolts to
3
a and
secure the stem.
to the
b
b
a
04