How To Charge - Ninebot eKickScooter ZING A6 Manuel De L'utilisateur

3
Accelerate and decelerate: Within 7.5 mph (12 km/h), continuously kick to accelerate.
Step on the rear fender to brake.
4
Turn: To turn, shift your body and turn the handlebar slightly.
Accelerate Decelerate
WARNING
Stay alert and avoid abrupt acceleration or deceleration. Otherwise you risk serious injury due to
imbalance, loss of traction and falls. DO NOT perform stunts of any kind. Both tires must remain on
the ground at all times.
5
Get o : When the kickscooter has stopped cruising, step o one foot at a
time. Be extra cautious when dismounting for the first time. Take both feet
o the footboard for 30 seconds and with kickscooter will automatically
power o .
WARNING
Stay calm and DO NOT jump o the kickscooter.
DO NOT touch the hub motor to avoid scald.
Turn
09

5. How to Charge

CAUTION
The charger is not a toy. Children should not be allowed to touch the charging device, the supervising
adult needs to handle charging. Before and during charging, make sure the kickscooter is turned off.
Charging steps
1
Open the charging
port cover.
3
Close the charging port
cover when finished.
WARNING
● Use only the charger specified by the manufacturer. Other types can burst and catch fire.
● Do not attempt to charge your kickscooter if the charger or the power outlet is wet.
● When there is abnormal smell, sound or light display, stop charging immediately and contact after-sales service.
● Keep away from flammable and explosive materials when charging, and place the kickscooter in a place out of the
reach of children.
● When not charging, disconnect the charger from the power socket.
2
Insert the charging plug and connect
to the power socket.
Charger indicator：
Red: charging
Green: full
10