Parts And Functions; Power Button; Battery Indicator; Assembly - Ninebot eKickScooter ZING E8 Manuel Utilisateur

2. Parts and Functions

Please familiarize yourself with each part. The pictures shown are for illustration purpose only. Actual product may vary.
Brake lever
Stem
Spring damper
Footboard
Kickstand

Power button

Press the button to power on or change riding modes. The Turbo mode is set as default when turned on. Hold for 2s to power off.
Turbo mode
8.7 mph (14 km/h)
E8
Max. speed 10 mph (16 km/h)
E10
11.2 mph (18 km/h)
E12
solid, with 1 beep
Mode indicator
Ambient light (for E10 and E12 only)
full-color breathing

Battery indicator

The color indicates the battery level: ≥50% green, 20%–50% yellow, ≤20% red.
*When an abnormality occurs, both the battery and mode indicators will flash and an alarm will start beeping.
03
Handlebar
Accessories
Throttle
Battery charger 5 mm Allen
wrench
Folding hook
Power button
Battery indicator
Collar clamp
Mode indicator
Folding pedal
Fender brake
Reflector
Charge port
Hub motor
Cruise mode Safe mode
8.7 mph (14 km/h) 6.2 mph (10 km/h)
10 mph (16 km/h) 6.2 mph (10 km/h)
11.2 mph (18 km/h) 6.2 mph (10 km/h)
blink slowly, with 2 beeps blink fast, with 3 beeps
blue breathing red breathing

3. Assembly

Slightly loosen the bolts on the collar clamp.
1
Limited
Warranty
Park with the kickstand. Step on the footboard, hold
3
the handlebar and push forward to unfold the scooter.
WARNING
Power off the scooter before assembling. The brake
cable should not wrap around the stem.
2
Slide the stem in to the marked length.
4 Tighten the bolts on the collar clamp.
Torque: about 8.9 ft-lb (12.0 ± 1.0 N•m)
CAUTION
When not properly tightened, the handlebar will
rotate out of alignment and cause accidents.
04