Assembly Instructions; Assembling The Handle - Greencut GLM680SX Manuel D'utilisation

52

ASSEMBLY INSTRUCTIONS

Before assembling and starting the petrol lawnmower, first carefully read the entire user's manual and
the instructions contained in it.
IMPORTANT INFORMATION
The lawnmower is supplied WITHOUT FUEL AND OIL in the engine.
Your new lawnmower was tested at the production plant meaning that a small
amount of residual oil maybe in the engine.
TAKING THE LAWNMOWER OUT OF THE CARDBOARD PACKAGING
Take the lawnmower out of the cardboard packaging and check that no loose parts are left in the
packaging.
IMPORTANT INFORMATION
Carefully unfold the lawnmower handle, being careful not to pinch or damage the
lawnmower's control cables.

ASSEMBLING THE HANDLE

1. Insert the bottom part of the handle (Fig.2 – point1) into the respective hole on the lawn
mower (see arrow) and secure in place with 4 screws – two screws on each side of the
handle.
2. Attach the top part of the handle (Fig. 2 – point 2) to the bottom part of the handle using
the included screws with the quick coupler and wing nuts (Fig.2 – point 3).