auna Areal Bar 360 Mode D'emploi page 15

• Audio connections: Connect the audio outputs of your TV, your BluRay player or gaming console to the
audio inputs of this soundbar, using the optical input, the coaxial input, or the 3.5mm analogue input
with the fitting cables. Please see the diagram on p. 14 below.
• HDMI: Connect the HDMI OUTs of your TV, console, or BluRay player with the HDMI IN 1 or HDMI IN 2
of this soundbar. If the soundbar lies within the signal path from your BluRay player/gaming console
to your TV, you can use the HDMI OUT to patch the audio signal through to the TV.
The HDMI OUT of this soundbar supports ARC (audio return channel). So, with an ARC HDMI cable and an ARC
supporting TV, you can reduce the amount of cable connections by one. Please see your TV device's user manual for
further information.
• AC IN: Connect the soundbar to a houshold mains socket, using the supplied AC cord.
• On/standby: Switch the soundbar on by pressing
• Input source: Press
channel. The display shows which channel is currently selected:
Selected channel Display shows
HDMI IN-1 HD-1
HDMI IN-2 HD-2
ACR (HDMI OUT) ARC
Optischer Eingang OPT
Koaxialer Eingang COX
Aux-Eingang (3,5mm) AUX
• Adjust volume: Press +/- (front panel) or the arrow buttons (remote control) to adjust the volume.
• BT: Press MODE /
BAR 360 which should appear among the found BT devices within range. Type in "0000" if prompted
to enter a password. On successfully established BT connection, the BT LED stops flashing and a con-
firmation ("connected") will be heard.
This soundbar can not be used for hands-free phone calls. On incoming calls, the music being streamed
from the smartphone will be interrupted until ending (or declining) the call.
You can use the buttons
Operation
(front panel) or MODE (remote control) repeatedly, to select the desired input
BT bT
USB USb
to select BT mode. Activate BT on your mobile device and pair with the AREAL
/ and
. Hold for standby.
for navigating through your mobile media library.
15