Installing and Connecting the Projection TV
Connecting a Digital TV Receiver
z
Be sure to read the
Set-top box manual.
z
Some Digital TV
Receivers are equipped
with a DVI connection.
Refer to your Digital TV
Receiver manual for
setup instructions using
this connection.
Digital TV Set-top box
28
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P
B
✍
The Y, P
and P
B
be connected to provide sound.
✍
Component video connection is necessary to view 480p, 720p, and
1080i formats. You may also use the S VIDEO or Composite Video
connections, however, component video (Y, P
best picture quality for all format types.
2
Using an audio cable, connect the Digital TV Set-top box's Audio OUT
jacks to the projection TV's AUDIO IN jacks.
VMC-10HG (not supplied)
RK-74A (not supplied)
✍
You cannot record the signal from any equipment connected into the
Y, P
and P
connectors.
B
R
✍
This projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
✍
The DVI connection is compliant with the EIA-861 standard and is
not intended for use with personal computers.
and P
jacks to the projection TV.
R
jacks do not provide audio, so audio cables must
R
AUDIO-R (red)
AUDIO-L (white)
, P
) will provide the
B
R
Rear of projection TV
P
R
P
B
Y