Specifications - Sony KP-51WS500 Mode D'emploi

Other Information

Specifications

Projection System
Picture Tube
Projection Lenses
Antenna
Television System
Screen Size (measured diagonally)
Channel Coverage
VHF
UHF
CATV
Power Requirements
Number of Inputs / Outputs
DVI-HDTV
Video (IN)
S Video (IN)
Audio (IN)
AUDIO (VAR/FIX)
TV Out
CONTROL S (IN/OUT)
Component Video Input
RF Inputs
Converter
Speaker Output
Dimensions (W × H × D)
76
3 picture tubes, 3 lenses, horizontal in-line system
7-inch high-brightness monochrome tubes (6.3 raster size), with optical
coupling and liquid cooling system
High performance, large
diameter hybrid lens F1.1
75 ohm external terminal for VHF/UHF
NTSC, American TV Standard
51 inches (KP-51WS500)
57 inches (KP-57WS500)
65 inches (KP-65WS500)
2-13
14-69
1-125
120V, 60 Hz
4
3
6
1
1
1
2 (Y, P , P )
B R
2
1
20 W × 2
47 1 / × 51 5 / × 24 7 / inches (1,194 × 1,310 × 630 mm) (KP-51WS500)
8 8 8
52 1 / × 54 1 / × 27 1 / inches (1,326 × 1,377 × 690 mm) (KP-57WS500)
4 4 4
61 × 57 × 29 inches (1,542 × 1,452 × 735 mm) (KP-65WS500)
1 terminal, 3.3V T.M.D.S., 50 ohms
The DVI input terminal is compliant with the
EIA-861 standard and is not intended for use
with personal computers.
1 Vp-p, 75 ohms unbalanced, sync negative
Y: 1 Vp-p, 75 ohms unbalanced, sync negative
C: 0.286 Vp-p (Burst signal), 75 ohms
500 mVrms (100% modulation)
Impedance: 47 kiloohms
500 mVrms at the maximum volume setting
(Variable)
500 mVrms (Fixed)
Impedance (output): 1 kiloohm
Video: 1 Vp-p 75 ohms unbalanced, Sync
negative
Audio: 500 mVrms (100% modulation)
Impedance (output): 1 kiloohm
minijacks
Y: 1.0 Vp-p, 75 ohms unbalanced, sync
negative
P : 0.7 Vp-p, 75 ohms
B
P : 0.7 Vp-p, 75 ohms
R