Dolby Digital - Sony MDR-DS6000 Mode D'emploi

COMPRESSION Switch
Position of switch
OFF
ON
Illustration of the compression process
explosion
input signal
dialogue
whisper, background noise
DECODE MODE indicators
The processor automatically identifies the format of the input audio signal and the
corresponding indicator lights up. Switch the audio between Dolby Digital, DTS, MPEG-2
AAC, etc., on the connected equipment (DVD device, digital satellite/TV receiver, etc.).
• DOLBY DIGITAL: Input signal recorded in the DOLBY DIGITAL format.
• DOLBY PRO LOGIC II: Analogue input signal, digital input PCM signal, or Dolby
Digital 2-channel signal processed by DOLBY PRO LOGIC II.
(If the sound field is set to "OFF," it is not processed by DOLBY PRO LOGIC II.)
• DTS: Input signal recorded in the DTS format.
• MPEG-2 AAC: Input signal recorded in the MPEG-2 AAC format.
Note
If the equipment connected to the DIGITAL IN jack is not playing back (fast forwarding,
rewinding, etc.), the DECODE MODE indicators may not light up correctly.
GB
20
Operation
Playback Effect
When the EFFECT switch is selected, the sound mode changes to the
selected effect.
This function maintains the overall level of program material:
explosive sounds are attenuated while lower level sounds (dialog,
etc.) are enhanced.
output signal
compression
Dynamic range compression
by built-in DSP processor
explosion
dialogue standard
whisper, background noise
Startling
level
Easy to hear
level
Difficult to
hear level