Connecting The Headphone System; Connecting The Processor To Digital Components - Sony MDR-DS6000 Mode D'emploi

1 Connection

Connecting the Headphone System

Connecting the processor to digital
components
Use the supplied optical digital connecting cable to connect the optical digital output
jack* 1 on a DVD device, digital satellite/TV receiver, or other digital component*
the DIGITAL IN jack (black) of the processor.
The connected AV component may need to be set up for optical digital output. Read
their operating instructions of the connected device.
When connecting the processor to an AV amplifier, etc., connect the DIGITAL OUT
jack (Red) and external optical digital input jack using the optical digital connecting
cable (sold separately).
Processor
To DIGITAL IN
jack (Black)
Notes
• The optical digital connecting cable is an extremely high-precision device and is sensitive to
jolts and external pressure. Therefore, be careful when inserting and removing the cable plug.
• The digital input for the processor does not support sampling frequencies of 96 kHz. Set the
digital output setting of the DVD device to 48 kHz when using this system. Noise may be
heard when a 96 kHz digital signal is input.
1
* If the connected equipment supports PCM output only, all surround sound effects will be
processed by DOLBY PRO LOGIC II.
2
* Connection to the optical digital output jack on your personal computer is not guaranteed to
work with this system.
DTS
• A DTS-compatible DVD device is required for playback of DVDs recorded in DTS audio. (For
more details, see the instruction manual of your DVD device.)
• When playing CDs recorded in DTS format, noise may occur when fast forwarding or
rewinding. This is not a malfunction.
• If the DTS digital output is set to "OFF" on the DVD device, no sound may be heard even if the
DTS output is selected in the DVD menu.
• No sound may be heard when a DVD device and this unit is analogue-connected. In this case,
use a digital connection.
To DIGITAL
Optical digital connecting
OUT jack
cable (sold separately)
(Red)
Optical digital connecting cable (supplied)
Match the orientation of the plug with the
jack, and then insert until the plug fits into
place.
To optical digital
input jack
Equipment with optical
digital input terminal such
as an AV amplifier
To optical digital
output jack
DVD device, digital satellite/TV
receiver, or other digital
component having an optical
digital output jack
Connection
2 to
(Continued)
GB
15