Antari FT-100 Mode D'emploi page 9

Registering a transmitter
Transmitters can be paired or deleted from the receiver. Each receiver can pair up to 5
transmitters. Follow the steps below to pair or delete a transmitter from a receiver.
Step 1: Press and hold the left rotary knob for 3 seconds to enter setting menu.
Step 2: Rotate the rotary knob to find the "Wireless Detect" menu.
Step 3: Follow the menu instruction to pair or delete a transmitter.
Transmitter battery replacement
If the effective distance seems to decrease, it is possible the battery level is low and requires
replacement. In order to replace the battery, undo the three screws on the back of
transmitter to release the cover. Replace with the same type and specification of battery
which is 27A 12V
DMX Connector Pin Assignment
The machine provides a 5-pin XLR connector for DMX connection. The diagram below
indicates pin assignment information.
Pin
1
2
3
4
5
Function
Ground
Data-
Data+
N/A
N/A
9