Citizen CH-453 Manuel D'utilisation page 19

CALLING UP THE DATA STORED IN MEMORY
• Press the "MEMORY" switch again. The
memory number "1" and the last set of data
stored appear on the display. (The memory
number and pulse are alternately displayed.)
• Press the "MEMORY" switch again. The
memory number "2" and the second last set
of data stored appear on the display.
Each time you press this switch, the unit
displays the data prior to the last set of data
displayed.
• The value stored in memory is numbered in
the order of measurements. For example,
when 90 sets of data are stored in memory,
the data number 1 represents the latest data.
Data number: 1, 2, 3, ...
* You can fast-forward the data numbers
in display by pressing and holding the
"MEMORY" switch.
Eng 19
- -
... 89, 90

The latest The earliest
data data
